/*
#include <stdio.h>
void app_main(void)
{
}
*/
/* Blink Example
This example code is in the Public Domain (or CC0 licensed, at your option.)
Unless required by applicable law or agreed to in writing, this
software is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR
CONDITIONS OF ANY KIND, either express or implied.
*/
#include <stdio.h>
#include <string.h>
#include <sys/param.h>
#include "freertos/FreeRTOS.h"
#include "freertos/task.h"
#include "driver/gpio.h"
#include "esp_log.h"
#include "led_strip.h"
#include "sdkconfig.h"
#include "esp_random.h"
#include "esp_wifi.h"
#include "esp_event.h"
#include "esp_err.h"
#include "nvs_flash.h"
#include "esp_http_client.h"
#include "esp_tls.h"
static const char *TAG = "example";
/* Use project configuration menu (idf.py menuconfig) to choose the GPIO to blink,
or you can edit the following line and set a number here.
*/
#define BLINK_GPIO GPIO_NUM_16
#define CONFIG_BLINK_LED_STRIP 1
#define CONFIG_BLINK_LED_STRIP_BACKEND_RMT 1
#define CONFIG_BLINK_PERIOD 500
static uint8_t s_led_state = 1;
#ifdef CONFIG_BLINK_LED_STRIP
static led_strip_handle_t led_strip;
static void blink_led(void)
{
/* If the addressable LED is enabled */
if (s_led_state) {
/* Set the LED pixel using RGB from 0 (0%) to 255 (100%) for each color */
led_strip_set_pixel(led_strip, 0, esp_random() & 0x3F, esp_random() & 0x3F, esp_random() & 0x3F);
/* Refresh the strip to send data */
led_strip_refresh(led_strip);
} else {
/* Set all LED off to clear all pixels */
led_strip_clear(led_strip);
}
}
static void configure_led(void)
{
ESP_LOGI(TAG, "Example configured to blink addressable LED!");
/* LED strip initialization with the GPIO and pixels number*/
led_strip_config_t strip_config = {
.strip_gpio_num = BLINK_GPIO,
.max_leds = 1,
.led_pixel_format = LED_PIXEL_FORMAT_GRB,
.led_model = LED_MODEL_WS2812,
.flags = { .invert_out = false },
};
#if CONFIG_BLINK_LED_STRIP_BACKEND_RMT
led_strip_rmt_config_t rmt_config = {
.clk_src = RMT_CLK_SRC_DEFAULT,
.resolution_hz = 10 * 1000 * 1000, // 10MHz
.mem_block_symbols = 0,
.flags = { .with_dma = false },
};
ESP_ERROR_CHECK(led_strip_new_rmt_device(&strip_config, &rmt_config, &led_strip));
#elif CONFIG_BLINK_LED_STRIP_BACKEND_SPI
led_strip_spi_config_t spi_config = {
.spi_bus = SPI2_HOST,
.flags.with_dma = true,
};
ESP_ERROR_CHECK(led_strip_new_spi_device(&strip_config, &spi_config, &led_strip));
#else
#error "unsupported LED strip backend"
#endif
/* Set all LED off to clear all pixels */
led_strip_clear(led_strip);
}
#elif CONFIG_BLINK_LED_GPIO
static void blink_led(void)
{
/* Set the GPIO level according to the state (LOW or HIGH)*/
gpio_set_level(BLINK_GPIO, s_led_state);
}
static void configure_led(void)
{
ESP_LOGI(TAG, "Example configured to blink GPIO LED!");
gpio_reset_pin(BLINK_GPIO);
/* Set the GPIO as a push/pull output */
gpio_set_direction(BLINK_GPIO, GPIO_MODE_OUTPUT);
}
#else
#error "unsupported LED type"
#endif
static EventGroupHandle_t s_wifi_event_group;
static int s_retry_num = 0;
/* The event group allows multiple bits for each event, but we only care about two events:
* - we are connected to the AP with an IP
* - we failed to connect after the maximum amount of retries */
#define WIFI_CONNECTED_BIT BIT0
#define WIFI_FAIL_BIT BIT1
static void wifi_event_handler(void* arg, esp_event_base_t event_base,
int32_t event_id, void* event_data)
{
if (event_base == WIFI_EVENT && event_id == WIFI_EVENT_STA_START) {
esp_wifi_connect();
} else if (event_base == WIFI_EVENT && event_id == WIFI_EVENT_STA_DISCONNECTED) {
if (s_retry_num < 3) {
esp_wifi_connect();
s_retry_num++;
ESP_LOGI(TAG, "retry to connect to the AP");
} else {
xEventGroupSetBits(s_wifi_event_group, WIFI_FAIL_BIT);
}
ESP_LOGI(TAG,"connect to the AP fail");
} else if (event_base == IP_EVENT && event_id == IP_EVENT_STA_GOT_IP) {
ip_event_got_ip_t* event = (ip_event_got_ip_t*) event_data;
ESP_LOGI(TAG, "got ip:" IPSTR, IP2STR(&event->ip_info.ip));
s_retry_num = 0;
xEventGroupSetBits(s_wifi_event_group, WIFI_CONNECTED_BIT);
}
}
static void configure_wifi(void)
{
s_wifi_event_group = xEventGroupCreate();
ESP_ERROR_CHECK(esp_netif_init());
ESP_ERROR_CHECK(esp_event_loop_create_default());
esp_netif_create_default_wifi_sta();
wifi_init_config_t cfg = WIFI_INIT_CONFIG_DEFAULT();
ESP_ERROR_CHECK(esp_wifi_init(&cfg));
esp_event_handler_instance_t instance_any_id;
esp_event_handler_instance_t instance_got_ip;
ESP_ERROR_CHECK(esp_event_handler_instance_register(WIFI_EVENT,
ESP_EVENT_ANY_ID,
&wifi_event_handler,
NULL,
&instance_any_id));
ESP_ERROR_CHECK(esp_event_handler_instance_register(IP_EVENT,
IP_EVENT_STA_GOT_IP,
&wifi_event_handler,
NULL,
&instance_got_ip));
wifi_config_t wifi_config = {
.sta = {
.ssid = "DJArtsGames",
.password = "yubyubechubab",
/* Authmode threshold resets to WPA2 as default if password matches WPA2 standards (pasword len => 8).
* If you want to connect the device to deprecated WEP/WPA networks, Please set the threshold value
* to WIFI_AUTH_WEP/WIFI_AUTH_WPA_PSK and set the password with length and format matching to
* WIFI_AUTH_WEP/WIFI_AUTH_WPA_PSK standards.
*/
.threshold.authmode = WIFI_AUTH_WPA_PSK,
.sae_pwe_h2e = WPA3_SAE_PWE_UNSPECIFIED,
.sae_h2e_identifier = "",
},
};
ESP_ERROR_CHECK(esp_wifi_set_mode(WIFI_MODE_STA) );
ESP_ERROR_CHECK(esp_wifi_set_config(WIFI_IF_STA, &wifi_config) );
ESP_ERROR_CHECK(esp_wifi_start() );
ESP_LOGI(TAG, "wifi_init_sta finished.");
/* Waiting until either the connection is established (WIFI_CONNECTED_BIT) or connection failed for the maximum
* number of re-tries (WIFI_FAIL_BIT). The bits are set by event_handler() (see above) */
EventBits_t bits = xEventGroupWaitBits(s_wifi_event_group,
WIFI_CONNECTED_BIT | WIFI_FAIL_BIT,
pdFALSE,
pdFALSE,
portMAX_DELAY);
/* xEventGroupWaitBits() returns the bits before the call returned, hence we can test which event actually
* happened. */
if (bits & WIFI_CONNECTED_BIT) {
ESP_LOGI(TAG, "connected to ap SSID:%s password:%s",
wifi_config.sta.ssid, wifi_config.sta.password);
} else if (bits & WIFI_FAIL_BIT) {
ESP_LOGI(TAG, "Failed to connect to SSID:%s, password:%s",
wifi_config.sta.ssid, wifi_config.sta.password);
} else {
ESP_LOGE(TAG, "UNEXPECTED EVENT");
}
}
#define MAX_HTTP_OUTPUT_BUFFER 2048
esp_err_t _http_event_handler(esp_http_client_event_t *evt)
{
static char *output_buffer; // Buffer to store response of http request from event handler
static int output_len; // Stores number of bytes read
switch(evt->event_id) {
case HTTP_EVENT_ERROR:
ESP_LOGD(TAG, "HTTP_EVENT_ERROR");
break;
case HTTP_EVENT_ON_CONNECTED:
ESP_LOGD(TAG, "HTTP_EVENT_ON_CONNECTED");
break;
case HTTP_EVENT_HEADER_SENT:
ESP_LOGD(TAG, "HTTP_EVENT_HEADER_SENT");
break;
case HTTP_EVENT_ON_HEADER:
ESP_LOGD(TAG, "HTTP_EVENT_ON_HEADER, key=%s, value=%s", evt->header_key, evt->header_value);
break;
case HTTP_EVENT_ON_DATA:
ESP_LOGD(TAG, "HTTP_EVENT_ON_DATA, len=%d", evt->data_len);
// Clean the buffer in case of a new request
if (output_len == 0 && evt->user_data) {
// we are just starting to copy the output data into the use
memset(evt->user_data, 0, MAX_HTTP_OUTPUT_BUFFER);
}
/*
* Check for chunked encoding is added as the URL for chunked encoding used in this example returns binary data.
* However, event handler can also be used in case chunked encoding is used.
*/
if (!esp_http_client_is_chunked_response(evt->client)) {
// If user_data buffer is configured, copy the response into the buffer
int copy_len = 0;
if (evt->user_data) {
// The last byte in evt->user_data is kept for the NULL character in case of out-of-bound access.
copy_len = MIN(evt->data_len, (MAX_HTTP_OUTPUT_BUFFER - output_len));
if (copy_len) {
memcpy(evt->user_data + output_len, evt->data, copy_len);
}
} else {
int content_len = esp_http_client_get_content_length(evt->client);
if (output_buffer == NULL) {
// We initialize output_buffer with 0 because it is used by strlen() and similar functions therefore should be null terminated.
output_buffer = (char *) calloc(content_len + 1, sizeof(char));
output_len = 0;
if (output_buffer == NULL) {
ESP_LOGE(TAG, "Failed to allocate memory for output buffer");
return ESP_FAIL;
}
}
copy_len = MIN(evt->data_len, (content_len - output_len));
if (copy_len) {
memcpy(output_buffer + output_len, evt->data, copy_len);
}
}
output_len += copy_len;
}
break;
case HTTP_EVENT_ON_FINISH:
ESP_LOGD(TAG, "HTTP_EVENT_ON_FINISH");
if (output_buffer != NULL) {
// Response is accumulated in output_buffer. Uncomment the below line to print the accumulated response
ESP_LOG_BUFFER_CHAR(TAG, output_buffer, output_len);
free(output_buffer);
output_buffer = NULL;
}
output_len = 0;
break;
case HTTP_EVENT_DISCONNECTED:
ESP_LOGI(TAG, "HTTP_EVENT_DISCONNECTED");
int mbedtls_err = 0;
esp_err_t err = esp_tls_get_and_clear_last_error((esp_tls_error_handle_t)evt->data, &mbedtls_err, NULL);
if (err != 0) {
ESP_LOGI(TAG, "Last esp error code: 0x%x", err);
ESP_LOGI(TAG, "Last mbedtls failure: 0x%x", mbedtls_err);
}
if (output_buffer != NULL) {
free(output_buffer);
output_buffer = NULL;
}
output_len = 0;
break;
case HTTP_EVENT_REDIRECT:
ESP_LOGD(TAG, "HTTP_EVENT_REDIRECT");
esp_http_client_set_header(evt->client, "From", "user@example.com");
esp_http_client_set_header(evt->client, "Accept", "text/html");
esp_http_client_set_redirection(evt->client);
break;
}
return ESP_OK;
}
static char url[300];
void app_main(void)
{
//Initialize NVS
esp_err_t ret = nvs_flash_init();
if (ret == ESP_ERR_NVS_NO_FREE_PAGES || ret == ESP_ERR_NVS_NEW_VERSION_FOUND) {
ESP_ERROR_CHECK(nvs_flash_erase());
ret = nvs_flash_init();
}
ESP_ERROR_CHECK(ret);
configure_wifi();
//esp_http_client_cleanup(client);
/* Configure the peripheral according to the LED type */
configure_led();
gpio_config_t io_conf = {
.pin_bit_mask = (1ULL<<GPIO_NUM_18),
.mode = GPIO_MODE_INPUT,
.pull_down_en = GPIO_PULLDOWN_ENABLE,
};
gpio_config(&io_conf);
int last_level = -1;
while (1) {
//ESP_LOGI(TAG, "Turning the LED %s!", s_led_state == true ? "ON" : "OFF");
blink_led();
/* Toggle the LED state */
//s_led_state = !s_led_state;
vTaskDelay(CONFIG_BLINK_PERIOD / portTICK_PERIOD_MS);
int level = gpio_get_level(GPIO_NUM_18);
if (level != last_level)
{
ESP_LOGI(TAG, "GPIO_NUM_18 state: %d", level);
last_level = level;
sprintf(url, "https://talk.mhack.io/plugins/com.mattermost.bathroom/status-update?door_id=1&status=%d&password=abc", level);
esp_http_client_config_t config = {
.url = url,
.event_handler = _http_event_handler,
};
esp_http_client_handle_t client = esp_http_client_init(&config);
esp_http_client_set_url(client, url);
esp_err_t err = esp_http_client_perform(client);
if (err == ESP_OK) {
ESP_LOGI(TAG, "HTTPS Status = %d, content_length = %"PRId64,
esp_http_client_get_status_code(client),
esp_http_client_get_content_length(client));
} else {
ESP_LOGE(TAG, "Error perform http request %s", esp_err_to_name(err));
}
esp_http_client_cleanup(client);
}
}
}
